Garbage Compactor Truck
Six Key Advantages of the 4 Cubic FAW Garbage Compactor Truck
Superior Strength-to-Weight Ratio
The truck achieves an optimal balance between a lightweight design and a robust, high load-bearing capacity. This engineering advantage ensures greater fuel efficiency and reduced wear while maintaining the structural integrity needed for demanding daily waste collection cycles.Intelligent Power & Fuel Economy Optimization
Featuring a smart hydraulic system with an automatic engine power adjustment function, the truck intelligently manages energy use. It automatically increases engine speed during active compression for maximum power and returns to idle during non-operational phases, significantly reducing fuel consumption, power loss, and the potential for related mechanical faults.High-Efficiency Bi-Directional Compression
Equipped with advanced bi-directional compression technology, the compactor utilizes a two-stage process involving the scraper and push shovel. This results in exceptionally dense waste packing, increasing load capacity by up to 30% and drastically reducing the frequency of trips to disposal sites, thereby boosting overall job efficiency.Comprehensive Environmental Protection & Sealing
The fully enclosed, all-welded body is meticulously sealed with professional-grade sealant, effectively preventing garbage leakage, scatter, and the escape of unpleasant odors during transport, ensuring clean and complaint operation in sensitive urban environments.Integrated Odor Control & Sanitization
To address community concerns, the truck offers an optional integrated odor suppression system. This system can combine UV sterilization lamps with a biological deodorizer spray to simultaneously neutralize bacteria and process malodors during the compression cycle, promoting a more hygienic and neighbor-friendly operation.Reliable & Low-Maintenance Operation
The combination of its durable construction, intelligent power management (which reduces strain on the engine), and efficient hydraulic system design contributes to exceptional operational reliability. This leads to a lower occurrence rate of faults, decreased downtime, and reduced long-term maintenance costs.
1. Analysis of Technical Characteristics
（1）. Chassis system
Adopting the Liberation Tiger VR dedicated chassis, the short wheelbase and narrow body design optimize the vehicle's turning radius to adapt to narrow road sections. The suspension system enhances its load-bearing capacity, coupled with the rear twin tire configuration, to improve vehicle stability and passability.
（2）. Power system
This compressed garbage truck has abundant power output, meeting the needs of urban operations. The gearbox shifts smoothly and is suitable for frequent start stop conditions. Optimization design of fuel system, reducing fuel consumption and improving fuel efficiency.
（3）. Installation system
This compression garbage truck's garbage bin adopts a U-shaped structure, welded with high-strength manganese steel plates to ensure durability. The compression system adopts two-stage compression technology, with strong hydraulic cylinder pressure to achieve high compression ratio. The flipping device is compatible with various specifications of trash cans and supports quick loading and unloading.
（4）. Electrical system
The PLC control system realizes the automation of the work process and supports dual modes of cab electrical control and external manual control. Equipped with safety devices such as reversing camera and radar to enhance operational safety.
2. Scenario based application solution
（1）. Urban community garbage collection and transportation
The narrow body design and flexible turning ability make it suitable for narrow areas such as old residential areas and urban villages. The rear loading flip rack supports fast loading of standard trash cans, covering multiple points in a single operation, reducing transportation frequency.
（2）. Township garbage transportation
This garbage compactor truck adapts to complex urban and rural road conditions by strengthening the chassis and high load-bearing capacity. Optional swing arm device can be installed, matched with distributed garbage bins, to achieve "one vehicle, multiple bins" circular operation and improve the efficiency of garbage collection and transportation in remote areas.
（3）. Commercial complex waste management
The fully sealed box and leak proof design prevent fresh waste from contaminating the ground. Support the mixing and compression of bulk and canned garbage, suitable for scenarios such as supermarkets and agricultural markets, to meet the needs of source classification and measurement.
summarize
This compressed garbage truck has become the preferred solution for environmental sanitation operations in small and medium-sized cities due to its lightweight design, efficient compression performance, and flexible passability. Its high cost-effectiveness and low operating costs make it particularly suitable for users with limited budgets who need to balance efficiency and environmental protection. In the future, with the penetration of new energy and intelligent technology, this vehicle model will play a more important role in urban sustainable development.
【Technical parameters of the entire vehicle】 | |||||
Product trademark | Xiangnongda brand | Announcement Batch | 392 | ||
Product Name | Compressed garbage truck | Product model | SGW5040ZYSCA6 | ||
Total mass (Kg) | 4495 | Tank volume (m3) | 4 | ||
Rated load capacity (Kg) | 500 | Dimensions (mm) | 5995×2100×2200,2350 | ||
Curb weight (Kg) | 3865 | Axle load (Kg) | 1750/2745 | ||
Cab capacity (persons) | 2 | Maximum speed (Km/h) | 95 | ||
Approach Angle/Departure Angle (degrees) | 15/13,18/13 | Front suspension/rear suspension (mm) | 1155/1740 | ||
remarks | The main specialized equipment of the vehicle consists of a box and a compression system, used for garbage collection and transportation; Correspondence between external length and extension (mm): 5995/300; The side protection material is Q235B, connected by bolts; The rear protection is replaced by a dedicated device, with a lower edge height of 430mm above the ground; ABS manufacturer/model, this model can be optionally equipped with a direct power supply ETC onboard device The curb weight includes: tripod, on-board tools, excluding spare tire; The material of the cargo box is Q235, the thickness of the bottom plate is 4mm, the thickness of the side plate is 3mm, and the weight is 1700kg; optional upper style is available. | ||||
【Chassis Technical Parameters】 | |||||
Chassis Model | CA1041P40K50L1BE6A84 | Chassis name | Truck chassis | ||
Trademark name | liberation brand | manufacturing enterprise | China FAW Group Co., Ltd | ||
Number of axes | 2 | Number of tires | 6 | ||
Wheelbase (mm) | 2800 | ||||
Tire specifications | 195/70R15 12PR,6.50R16 12PR,195/70R15 10PR,6.50R16 10PR,6.50R16LT 10PR,195/70R15LT 10PR,7.00R16LT 8PR,6.50R16LT 12PR,6.50R16C 10PR,6.50R16C 12PR | ||||
Number of steel plate springs | 3/4,3/3+1,3/3+2,3/7+3,3/1+1,1/1+1,2/3+2,5/7+6,3/3 | Front wheel base (mm) | 1520 | ||
Fuel type | diesel oil | Rear wheel base (mm) | 1475,1525 | ||
Emission standards | GB17691-2018国Ⅵ | ||||
Engine model | Engine manufacturing enterprises | Emissions（ml） | Power (Kw) | ||
Q23-95E60 Q23-115E60 CA4DB1-11E6 CA4DB1-12E6 | Anhui Quanchai Power Co., Ltd Anhui Quanchai Power Co., Ltd China FAW Group Co., Ltd China FAW Group Co., Ltd
| 2300 2300 2207 2207 | 70 85 81 88 | ||
FAQ
Q1: What is the maximum waste capacity of this compactor truck in practical operation?
A1: The truck is designed with a compacted waste capacity of 4 cubic meters. Through its bi-directional compression technology, it can achieve up to 30% higher effective load density compared to standard containers, optimizing transport efficiency.
Q2: How does the bi-directional compression system work?
A2: The system utilizes a two-stage compression process: first, the scraper compresses waste horizontally, then the push shovel compacts it vertically. This ensures tighter packing, reduces air pockets, and maximizes load stability.
Q3: Can this truck operate in narrow or crowded urban areas?
A3: Yes. Its compact 4-cubic-meter design combined with a maneuverable chassis allows easy access to tight streets, residential complexes, and commercial alleys, making it ideal for high-density urban waste collection.
Q4: What measures are in place to prevent odor and leakage during transport?
A4: The fully enclosed, all-welded body is sealed with industrial-grade sealant. An optional UV sterilization and biological deodorizer system actively neutralizes odors and germs, ensuring environmentally compliant operation.
Q5: How does the automatic engine power adjustment function improve efficiency?
A5: The smart hydraulic system detects operational stages: it raises engine speed during compression for full power and idles during non-compression phases. This reduces fuel consumption by up to 15% and minimizes engine wear.
Q6: What type of waste is this truck suited for?
A6: It is optimized for municipal solid waste, including household garbage, packaging materials, and organic waste. The crushable scraper can break down bulky items like cardboard and light plastics for better compaction.
Q7: What are the maintenance requirements for the compression mechanism?
A7: The hydraulic and compression components are built for durability. We recommend routine inspection every 500 operating hours and periodic lubrication. The system’s intelligent power management also reduces stress on key parts, lowering maintenance frequency.
Q8: Is the truck compatible with different chassis models?
A8: The compactor body is engineered to integrate seamlessly with FAW’s dedicated lightweight chassis, ensuring optimal balance and performance. Custom adaptations for other standardized chassis may be available upon request.
Q9: What safety features are included for operators and the public?
A9: Standard safety features include 360° camera systems (optional), rear anti-collision warnings, and a fully locked compartment during transit. The compression process is controlled via a secure, operator-only panel.
Q10: What warranty and after-sales support are provided for international buyers?
A10: The truck comes with a standard 2-year warranty on the compactor body and key components. We offer global spare parts supply, remote technical support, and optional on-site training for operators and maintenance staff.
